To ensure that your hair clippers cut smoothly and last longer, you must oil them regularly. Many people don’t know how to oil a hair clipper properly and what steps ensure the best results. It is an easy procedure that needs attention and regularity. With some professional advice, you can maintain your clipper blades sharp, quick, and clean.
Good maintenance saves money on repairs and replacements besides enhancing performance. Be it a professional barber or a person who cuts hair at home, it is all about knowing how to oil and maintain clippers properly.
Why Oiling and Maintenance Matter
Oiling prevents friction between the blades. Reduced friction translates to easier cutting, reduced heat, and increased life of the blade. The blades become dulled more quickly and the motor labors more when clippers are operated without oil. This reduces the total life of the tool.
Hygiene is also enhanced by regular maintenance. Hair clippers are in direct contact with hair and skin. Bacteria, rust and dirt accumulate without cleaning and oiling. These problems can be avoided by proper care and making each haircut professional.
Tools and Materials You Need
Prepare the appropriate tools before you begin. The essentials are clipper oil, a small brush, a clean cloth, and clipper spray (where possible). These are the basic products that can maintain your device in good condition. Their readiness will help make the process fast and easy.
Use your clippers carefully. Never leave them plugged in when cleaning or oiling. When the clipper is cordless, turn it off. This will minimize the chances of accidents and will also keep you and the tool safe.
Read – Top 5 Stubble Trimmers Every Man Should Own
Step-by-Step Guide:
Start with a clean surface. Cleanse hair and dust off clipper body. Then blow hair between the blades. It is always good to oil the blades after cleaning and not before. This makes oil enter well.
Then put two or three drops of oil on the blades. Turn the clipper on for a couple of seconds to ensure that the oil is spread evenly. Use a soft cloth to wipe off excess oil.
Where to Put the Oil Exactly
The oil should go on the top blade where the metal parts slide against each other. Place drops at the left, right, and center points. This covers all contact areas. Avoid putting oil inside the motor or on plastic parts.
One of the most common mistakes is the excessive use of oil. Excessive oiling may result in the dirt sticking and making the clipper messy. A few drops are enough. It is always better to oil less than more.
Deep Cleaning Before Oiling
Cleaning is as important as oiling. Begin by brushing off visible hair. A cleaning brush or even a toothbrush can be used in tight areas. This helps to avoid clogging and enables blades to operate freely.
To clean more thoroughly, apply clipper spray or disinfectant. These kill germs and prevent rust. Lightly spray the blades and allow them to dry before oiling. Oil after cleaning to resume smooth movement.
Best Oils to Use for Clippers
This is the purpose of professional clipper oils. They are light, thin and heat resistant. This enables them to move between blades without gumming up. The correct oil will always produce the best results.
Do not use household oils like olive oil or motor oil. These are too thick and will ruin your clippers. They are also capable of forming sticky residue. Always use good clipper oil to maintain safely and effectively.
Regular Maintenance Habits
Post-use care is important on a daily basis. Blow dry hair, clean blades, and put on oil. This practice maintains clippers clean and sharp. It can be done in a couple of minutes but avoids major problems in the future.
Maintenance is done weekly to check the blade alignment and check cords or batteries. Deep cleaning and tightening of all screws should be done on a monthly basis. These are easy habits that will keep your clippers going years.
How to Store Your Hair Clipper Properly
Damage is avoided by proper storage. Never leave clippers in a damp place. Rust and blade weakening are caused by moisture. A protective case suits both home users and professionals.
Cored clippers are to be stored with the cord loosely wrapped. Do not bend or twist the cord. In the case of cordless clippers, keep them fully charged and do not expose them to extreme temperatures of either hot or cold.
Common Mistakes People Make
Other individuals apply too much oil on their clippers. This makes additional oil spill and collect dust. Some do not oil at all and this causes the blades to wear out and overheat. The balance is central to performance in the long term.
Another mistake is using the wrong oil. Household oils can clog blades. Also, failing to clean before oiling only traps dirt. Always clean first, then oil with the right product.
Signs Your Clipper Needs Maintenance
When your clipper begins to pull hair rather than cut smoothly, then it requires some attention. This normally indicates that the blades are either dry or dirty. The problem is usually solved by frequent oiling.
Noisy motor or blades that are warming up are also warning signs. These issues point to tension or incongruity. It will be irreparable to ignore them. These problems are kept in check by maintenance.
Pro Tips for Long-Term Clipper Care
Blades are changed often by professional barbers to maintain high performance. Blades do wear out even with oiling. The ability to know when to change them makes haircuts sharp and accurate.
The other pro habit is to label clippers with various tasks. As an example, one clipper would be used on fades and another on beards. This minimizes wear and increases the life of every tool.
Quick Checklist for Busy Users
If you are short on time, follow this quick checklist:
- Brush off hair after every use
- Apply 2–3 drops of clipper oil
- Wipe extra oil with a cloth
- Store in a dry, safe case
These simple steps take less than five minutes. Following them daily ensures your clippers run smoothly and last much longer.
Conclusion
Care of clips is not hard, but must be constant. The right way to oil, clean and store your clippers will ensure years of sharpness, speed and safety. Frequent maintenance averts failure and will be cost-effective in the future.
You can cut your hair at home or in a salon, but it is better to take care of your clippers like a professional. Oil and clean your hair as a routine and you will always have smooth cuts without any problem.